TRICK to Boost Your WiFi Signals By Using Just An Empty Beer Can
Do you have a Wi-Fi? Is your Wi-Fi speed is as fast as a snail on a tree trunk? Here is a trick to boost your Wi-Fi signal speed.
Trick : Boosting Wifi Singnals using a beer can.
What do you need?
- Scissors
- A can of beer (Empty)
- A razor knife
- A Cellotape
Step 1: Drink your beer!
Do not plan to drive or be an engg. now, just relax for an hour and enjoy.
Step 2: Pull off the can’s tab
Step 3: Now, mark a red line above can’s bottom and cut the bottom end off completely using a razor knife.
Step 4: Take your razor knife to cut around the top, leaving the part below the opening, attached. Make sure the slice is not complete or else you will waste the can for the trick and will have to drink one more beer 
.
Step 5: Take a pair of scissors and cut along the middle line of the can (vertically), as shown in the pic.
Step 6: Carefully open up the middle piece of the can by flattening it out. It will look like a small antenna or a radar.
Step 7: Put a little tape at the bottom and slide the whole arrangement on your wireless router’s antenna and you’re sorted! Just to attach it with the router, to prevent it falling and to make it adhere a static position.
You can use Adhesive too
8. Here you go, the new wi-fi booster, your personal signal booster is ready to serve you.
thank you!
